I went to the EU Support section on www.creative.com.. to the "Sound - General Troubleshooting" topic in order to sort out the hissing, distortion-like sound that's coming from my speakers. I'm tryign to check all the points mentioned, but don't understand how to on the following:
-----------------------------------------------------
If you find any of the above symptoms with your sound card , please go through the following troubleshooting steps:
Physical Installation
*Install your Sound Blaster card in a PCI slot as far away as possible from other components (e.g. graphics card, CPU, hard drives)
*Tidy up all cables inside your PC (to avoid electrical interference)
BIOS related troubleshooting
*Remove all unnecessary hardware to free up resources
*Disable all unused on-board devices (e.g. onboard sound, serial ports)
*System Performance: Try a more moderate setting if your system is set up for maximum performance. (possible settings: "Turbo", "Optimal", "Normal", etc.)
*VGA Shared Memory Size: Try increasing this if you have an onboard graphics card
*AGP Aperture Size (MB): Set this to half the system's RAM or lower
*Peer Concurrency: Toggle this setting
*PCI 2.1 Support: PCI 2.1 must be enabled
*Spread Spectrum Control: Toggle this setting
*PCI Latency Timer: Try different values, starting with 32
*Memory Hole: Toggle this setting
*AGP Fast Writes: Enable this setting if your graphics card supports it
*PNP(Plug and Play) Aware OS: Try setting this to No
*Update the BIOS of your system, if none of the above steps solve the problem
Windows related troubleshooting
*Disable DMA access for your drives: Windows 98SE/ME or Windows 2000/XP
*Contact your motherboard manufacturer/PC vendor to update the chipset drivers
*Lower the hardware acceleration of the graphics card
----------------------------------------------
Anything in bold I'm not sure how to do and therefore haven't done, could someone explain how to do each one? Sorry for the hassle.
AMD Athlon 1.0 Ghz
GeForce 4 Ti 8x AGP 4200
40 GB
6XX MB RAM
Thanks.

